Floor lamp cleaning and maintenance tips can extend the service life

Because the floor lamp is easy to move and suitable for the placement of furniture, the use in the home is becoming more and more common, so do you know how to clean the floor lamp? Do you know how to maintain floor lamps? The following Xiaobian will talk about the tips for cleaning and maintenance of floor lamps in daily life.
Floor lamp cleaning method:
1. If the lamp is non-metallic, it can be wiped with a damp cloth to avoid dust accumulation and affect the lighting effect.
2. The key to the maintenance of floor lamps is moisture-proof, especially the lamps in the toilet, bathroom and the stove front lamp in the kitchen, and moisture-proof lampshades should be installed to prevent moisture intrusion and avoid rust damage or leakage short circuit.
3. When cleaning the floor lampshade, use a clean feather duster to gently sweep away the dust and do not deform the lampshade. The lampshade is prone to accumulate gray layer and cause darkening, so clean the lampshade frequently.
4. Do not clean the lamp with water, as long as wipe it with a dry rag dipped in water, if you accidentally touch the water to wipe it dry as much as possible, do not wipe it with a wet rag immediately after turning on the light.
Floor lamp maintenance tips:
1, moisture-proof - electrical appliances are most worried about moisture, which will reduce the service life, but also have the danger of electricity, so the key step of floor lamp maintenance is moisture-proof, whether it is placed in the living room, or the toilet, bathroom lighting and kitchen stove headlights, to install moisture-proof lampshades to prevent moisture intrusion, promote rust damage or leakage short circuit of lamps.
2, dust removal - floor lamp maintenance should also often carry out dust treatment, especially the lampshade of the floor lamp, the lampshade is easy to accumulate gray layer to cause darkening, affecting the lighting effect, so clean frequently. When cleaning the floor lampshade, use a clean feather duster to gently sweep away the dust and do not deform the lampshade.
3, do not switch frequently - try not to switch frequently when using lamps, because the lamps in the moment of frequent start, the current through the filament is greater than the current during normal work, so that the filament temperature rises sharply and accelerates sublimation, which will greatly reduce its service life, so to minimize the switch of the lamp.