Cleaning Tips For Chandeliers

1. Do not wipe the bracket with alcohol
Since most of the chandelier bracket accessories are electroplating technology, but the electroplating layer is easily damaged by alcohol water corrosion, so when wiping the bracket and accessories, the soft cloth should not be stained with water, especially not alcohol water, so as not to wipe the protective film outside the electroplating layer and affect the surface glossy effect of the lamp stand.
2. Clean with detergent
Buy a special cleaning agent sprayed on the hanging lamp, the cleaning agent will volatilize together with dust and stains; The crystal pendant can also be removed and soaked in kerosene, cleaned with washing powder after the stain is softened, and then installed after drying.
3. Ensure the balance of the chandelier
When cleaning the chandelier, we should maintain the balance of the lamp body, which means that if we need to remove the bead string when cleaning, we cannot remove the crystal on one side, but evenly remove it from both sides, which can prevent the phenomenon of tilting the lamp body due to the inconsistency of weight, and reduce the chance of crystal damage. Interior living room chandelier
4. Wipe the crystal beads with a soft cloth
When rubbing the beads, be sure to use a soft cloth diluted with dish soap diluted water, and gently wipe on the front and back of the crystal beads at the same time (do not pinch the beads and pull them down when wiping to avoid tearing the bead string). If you find that the connecting buckle of the beads is rusty and discolored, one is not beautiful, the other is easy to crack, and replace it by the way; If the bead string defect is found, it is advisable to make up for it in time.